The following shows the end of the startup messages on the Linux SBC, then the
debug messages from the iridium scripts, then the Linux logon message and prompt.
-------- explanatory notes added in RED below ---------
Starting PCMCIA services: cardmgr. cardmgr[111]: starting, version is 3.1.22 cardmgr[111]: watching 1 sockets cardmgr[111]: socket 0: ATA/IDE Fixed Disk /etc/rc2.d/S50ssh: expr: command not found Starting OpenBSD Secure Shell server: sshdcardmgr[111]: executing: 'modprobe ide-cs' Trying to free nonexistent resourcehda: SanDisk SDCFB-64, ATA DISK drive ide0 at 0xf6000000-0xf6000007,0xf600000e on irq 36 hda: 125440 sectors (64 MB) w/1KiB Cache, CHS=490/8/32 Partition check: hda:. hda1 ide_cs: hda: Vcc = 3.3, Vpp = 0.0 cardmgr[111]: executing: './ide start hda' hda: hda1 hda: hda1 <--- redundant CFLASH storage is ready -------- Iridium modem scripts run next --------- /root/iridium/ird-temp.hex <--- opening file for logger records Capturing...all done! <--- acquiring records from logger Number of records swapped: 257 <--- got 4+ hours worth of records from logger output16 = f <--- Iridium modem power is ON 1 - 1 - AT <--- Modem is talking! 2 - OK Getting CREG...CREG: 0,1 <--- Modem is registered and ready that's 14 seconds message length = 128 <--- Iridium 128-byte binary message is ready 1 - AT+SBDWB=128 2 - OK 3 - 4 - 0 that's 1 seconds <--- Iridium modem buffer contains 128-byte message 1 - AT+SBDI <--- Send the message 2 - 3 - +SBDI: 1, 22, 0, 0, 0, 0 <--- Message Seq. # 22 has been sent and acknowledged! all done! output16 = 0 <--- Iridium modem power is OFF that's all, folks! -------- Iridium modem scripts complete --------- ************************************************** ** Intrinsyc Linux (I-Linux) ** ** Copyright 2001,2002 Intrinsyc Software Inc. ** ** Version: 4.6 ** ** Support: http://support.intrinsyc.com ** ************************************************** familiar login: